Subscribe to our Newsletter
Model No: MFM-EDP
Extractable double shaft paddle mixer
Quantity :
Scope of application
The MFM-EDP pull-out dual axis paddle mixer is a standard mixing equipment for the production of infant formula food, which can meet the extremely high mixing quality requirements of the industry; This mixer can avoid any cross contamination and meet strict requirements in clean and hygienic design. During the mixing process, the best mixing uniformity can be achieved while still retaining the high quality of the raw materials. This mixer can well meet the requirements of powder product mixing, uniform distribution of small materials, and cleanliness.
Performance characteristics
■Shorten mixing time
Equipped with two reverse rotating mixing shafts, the blades assembled on the mixing shaft enable the mixer to form a mechanical fluidized bed during the mixing process. This design can achieve extremely high radial and axial transmission rates, thereby achieving the highest mixing uniformity.
It can effectively shorten the mixing time and handle sensitive products gently, with a gentle process. Up to 6 mixing cycles can be achieved per hour.
■Easy to clean and hygienic design
The withdrawable cantilever drive design allows the entire drive device, including the hybrid rotor, to be automatically removed from the cylinder with one click, making it easy to clean and inspect.
■Low residue rate
The discharge port of the mixer is a rectangular large opening, which allows for quick and clean discharge and reduces residual rate;
The mixing silo is fully welded and polished, without any fasteners such as screws, nuts, etc., to reduce residual rate and facilitate cleaning.
■Good sealing performance, no leakage
Sealed operation, smooth operation, and no dust leakage at the discharge port during the mixing process.
The shaft end seal adopts a special gas seal, with no friction between the shaft and the sealing ring, ensuring no leakage and no contamination of the mixture. The sealing ring does not need to be replaced for many years.
■Low energy costs
Short mixing time, high efficiency, low energy consumption per unit product, energy-saving and environmentally friendly.
■Beautiful and atmospheric
Except for the gearbox, direct connection mechanism, and bearing seat, all other parts of the entire machine are made of stainless steel, which is aesthetically pleasing.
The MFM-EDP pull-out dual axis paddle mixer is a standard mixing equipment for the production of infant formula food, which can meet the extremely high mixing quality requirements of the industry; This mixer can avoid any cross contamination and meet strict requirements in clean and hygienic design. During the mixing process, the best mixing uniformity can be achieved while still retaining the high quality of the raw materials. This mixer can well meet the requirements of powder product mixing, uniform distribution of small materials, and cleanliness.
Performance characteristics
■Shorten mixing time
Equipped with two reverse rotating mixing shafts, the blades assembled on the mixing shaft enable the mixer to form a mechanical fluidized bed during the mixing process. This design can achieve extremely high radial and axial transmission rates, thereby achieving the highest mixing uniformity.
It can effectively shorten the mixing time and handle sensitive products gently, with a gentle process. Up to 6 mixing cycles can be achieved per hour.
■Easy to clean and hygienic design
The withdrawable cantilever drive design allows the entire drive device, including the hybrid rotor, to be automatically removed from the cylinder with one click, making it easy to clean and inspect.
■Low residue rate
The discharge port of the mixer is a rectangular large opening, which allows for quick and clean discharge and reduces residual rate;
The mixing silo is fully welded and polished, without any fasteners such as screws, nuts, etc., to reduce residual rate and facilitate cleaning.
■Good sealing performance, no leakage
Sealed operation, smooth operation, and no dust leakage at the discharge port during the mixing process.
The shaft end seal adopts a special gas seal, with no friction between the shaft and the sealing ring, ensuring no leakage and no contamination of the mixture. The sealing ring does not need to be replaced for many years.
■Low energy costs
Short mixing time, high efficiency, low energy consumption per unit product, energy-saving and environmentally friendly.
■Beautiful and atmospheric
Except for the gearbox, direct connection mechanism, and bearing seat, all other parts of the entire machine are made of stainless steel, which is aesthetically pleasing.
Main Technical Data
Model | MFM-EDP700 | MFM-EDP1400 | ||||
Fully Volume | 700L | 1400L | ||||
Loading factor | 0.6-0.8 | 0.6-0.8 | ||||
Turning Speed | 53rpm | 45rpm | ||||
Total Weight | 900kg | 1500kg | ||||
Total Power | 7.5kw | 12kw | ||||
Length | 3840 | 4290 | ||||
Width | 1480 | 1834 | ||||
Height | 1330 | 1673 | ||||
Power supply | 3P AC208-415V 50/60Hz | |||||
Related Products
